My Wall Hanging Designs etc.

I am not a good carpenter, but I did come up with these designs
If you think that you may like to do this kind of thing, then read on.

Depending on how you have your browser set, when you click on the pictures to enlarge, you may need to click on it again for complete enlargement .

The material needed for these shelves above is two 1X6 boards, some golf tee's, a couple hangers, spray paint, and a router to cut a design into the edge of the boards.

The picture frame above is made of 1X2 pine, with a groove cut into one side of 1X2 for the pictures to slide into, spray paint whatever color you like.

These shelves are handy to hang most anything on them, also handy to hang your house and car keys close to the door to grab as you come and go..
Could also use 1/4 inch wooden dowels to replace the golf tees if you don't want to space them the way I did for displaying golf balls.

I'm sure you will come up with your own ideas after you get started.
Some more shelve, but only 12 inches long with hooks.

Here is something no golfer can do without, a place to put your favorite logo golf tee's.
Cut a piece of wood at an angle and drill holes in it, spray on a finish coat of varnish stain.

Comment to: PK Crafsman